SABRE SYSTEMS XWB SIG SAUER P365 Modular Holster

The holster has the entire clip module angled by 7.5 degrees, which together with the "BELT PRESS" molding under the trigger, which rests on the belt from the inside, helps to reduce the unwanted printing (print) of the firearm under clothing. On the back of the holster there is a removable WEDGE - a pressure wedge, which again helps to reduce the unwanted imprint of the firearm by pushing the upper part more into the body. Some likes it, some hates it. That is why we have it removable and it is available in two sizes - 12 and 16 mm. By default, a larger one is mounted on the holster so that you can try both positions - i.e. without it or with a large WEDGE, the smaller one can then be ordered separately. WEDGE works great in all holster configurations ie. not only for internal carry on the side or appendix, but also for OWB carry.

In the classic IWB configuration for Inside Waistband carry, it is possible to attach all the clips and accessories to the holster like our IWB holsters. That is or 1.75" (45 mm) with the possibility of tilt (0° or approx. 20° forward). Or it is possible to use UltiTuck or loops Soft Loops. 

For appendix (AIWB) carry TACWARE hooks are available (with five holes for standard pistols and compacts, with two holes for subcompacts). The holster has a recess for hooks with five (for the P365 without a flashlight only 4) holes for screws, so it is possible to adjust the depth of carrying the gun.  TACWARE are universal for belts up to 46mm wide, however they work great with 1.5" (38mm) belts as well.

Appendix holster configuration (AIWB+) can be configured with a MAGWING for magazine carrying. The MAGWING uses the MRD (Magazine Retention Device) system, which allows it to be adapted to any magazine, just like our magazine holsters MAG MRD. This means that if you have two XWB holsters for two different firearms, you can only use one MAGWING with them as needed. The MAGWING is attached to the holster with a CONNECTOR made of the highly durable,  but still flexible CURV® material - a similar material as e.g. Tegris. This guarantees high durability, flexibility of deflection between the holster and the MAGWING, without unwanted torsion when the magazine avoids the holster forward or backward. Both the CONNECTOR and the hole matrix on the MAGWING and the holster have five holes, so you can adjust the height of both components. 

The OWB configuration for OWB carry on the belt then offers a choice of three mounting variants.

We standardly use Infinity Loops made of almost indestructible polymer Tufmax 820, their middle part is flexible (it can be easily bent to a right angle) and the loops thus adapt to the shape of your waist. Offers a wide range of positions - if you mount the upper loop facing upwards and the lower loop facing downwards, you will get an ergonomic tilt of the firearm approx. 10° forward. If you mount them upside down, you get a negative slope of 10°. If you mount them both in the same direction upwards, you have the holster straight, without an inclination, sitting lower on the belt, if you mount them in the opposite direction, you will have it higher again. For even more precise tuning, it is possible to use the holes in the through-holes "one by one" and choose the corresponding position according to the mounting holes of the holster. From the factory, we install the loops in a position with a forward tilt.  These come in two sizes based on belt width - 1.5" (40mm) and 1.75" (44.4mm).

Infinity Loops can be replaced with universal TACWARE belt loops that work with belts from 1.5" (38mm) to 2" (50mm) wide. The holster is equipped with a matrix of holes that allows you to position the height of the holster - you simply choose which holes to use. TACWARE loops do not extend beyond the holster profile. 

The SABRE SYSTEMS OWB and XWB holsters are also compatible with DuraGrip quick release loops from the same company MatchPoint USA as the Infinity Loops. Again, they are made of the almost indestructible Tufmax 820 polymer. 

On our outer (OWB) and modular (XWB) holsters it offers a wide variety of positions by mounting in the holes that our holsters are equipped with. It is possible to position the holster in height, higher for better concealed carry, lower for a more comfortable and faster draw, as well as a slight inclination of the holster by placing one strap higher and the other lower. 

Dura-Grip quick-release loops have a distinctive "locking tooth" on the inside and outside of the belt, which minimizes the possibility of the loop slipping out of the belt. Even so, for non-recreational use, we recommend standard fixed loops with a loop (Infinity Loops), which form a solid connection between the belt and the holster, and therefore also with the firearm. Certainty is certain, and the comfort of quick-release straps also has its opposite.

The loops are available in two sizes - for 1.75" (44.4mm) wide belts and for belts up to 1.5" (38mm) wide.

Like all SABRE SYSTEMS kydex holsters, this holster is compatible with both standard and enlarged controls such as the bolt catch and magazine release button. All of our holsters are Red Dot-ready from the start, regardless of whether the gun comes factory-equipped with Red Dot preparation or you've had it retrofitted. Compatibility with high sights is also a matter of course.

The holster has an adjustable retention and a prominent retention point. The pistol goes into the holster smoothly, has minimized friction surfaces, especially on the sides of the bolt, there is little play, which helps to save the finish of the firearm, and locks firmly only after the firearm is fully inserted with a clear and noticeable "click" behind the trigger (in the holster of a holster without a flashlight). When drawing after overcoming the retention point, the gun leaves the holster completely smoothly again. The screws with rubber bands on the trigger edge of the holster are used for tuning the retention. 

The holster is designed as open in the lower part, which allows dirt to fall freely, such as sand during intensive activities, in an emergency it will also fit a longer firearm model (e.g. Glock 17 in a holster for Glock 19), while the overhanging part of the firearm will protrude from the holster. holsters for Subcompact pistols are closed at the bottom.

The holster has a full sweatguard. It can be shortened on request. 

The holster is intended only for the given model of firearm, or a combination of firearm and flashlight. A different model of gun or light gun will not fit in the holster or will not be adequately secured. 

When using, observe the safety rules for handling the firearm. Prevent loose parts of clothing or equipment from entering the holster when inserting firearm. Catching them between the holster and the trigger can lead to an unwanted shot and endanger life.  

If dirty, wash the holster from the inside and outside with a stream of running water and dry with a cloth. Do not use solvents or aggressive cleaning agents. 

Do not expose the holster to temperatures higher than 60 °C. Before each use of the holster, check that all screws are tight and ensure that there are no obstacles or foreign objects inside the holster.